 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Ultra Wash
I have a Kenmore ultra washer and the water spinner that hooks on the upper chamber, where you put the dishes fell off. I tried to put it back on but was unable to. Is there a tool I need or do I need to get a repair man? Please let me know. Thank You
|
||||
|
||||
|
I have a Kenmore Ultrawash d/w that's about 5 or 6 yrs old and if yours is similar to mine, I see two screws, one you can see from above looking down on the upper tray. It holds the plastic clip that is connected to the upper slid out tray and takes a phillip head screwdrive. The bottom screw at the very bottom also takes a phillips head screwdriver and it looks like unscrewing this screw takes the spray arm off and apart to include any washers. Hope this helps.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore Ultra Wash dishwasher that is approximately 5 years old. About 3 weeks ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock which it did, but still will not start. Now, the delay 2 hour light is constantly blinking and my dishwasher still...
My dishwasher has been working fine until one day it just won't run a new cycle. The clean light is flashing and when I press the start button, the clean light proceeds to flash several times. Please help!:confused:
My Kenmore Ultra Wash dishwasher will not drain when finished. What are my options?
Dishwasher doesn't drain after cycle..
I have a kenmore ultra wash that I inherited with a house about 6 years ago. All was fine until recently when it became apparent that the dishes were no longer coming out of the dishwasher clean. Glasses come out with a film on them, silverware still looks dirty, plates dirty... Has the thing...
View more questions Search
|
