Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Beam size to replace load-bearing wall
[ 13 Answers ]
Okay, I'm trying to decide if it's worth the trouble to open up a room in my basement. It is currently a 16 ft wide wall with a single doorway in it. It is a load-bearing wall. I'd like to open up the doorway to about 10'6" width. The wall supports the floor above, and there is another...
Grade beam or load bearing wall
[ 2 Answers ]
I'm in the planning stage for our new house, and we're going with a permanent wood foundation. This is a full basement. I have two choices, I can go with your standard built up lumber grade beam for the house with teleposts (columns), or I can build a load bearing wall in the basement. ...
Replacing a load bearing wall with an engineered beam.
[ 4 Answers ]
I have a load bearing wall between two living areas that I would like to remove to create one large space. I would like to do it without the beam exposed in the area. My question is can the ceiling joists be cut and reattached to the beam using joist hangers? I understand that there would have to...
Sizing a beam to replace load bearing wall.
[ 3 Answers ]
I am planning on removing 15' of a 2x6 load bearing wall in my basement and want to confirm the sizing of the steel beam. I had an engineer have a look, but the only engineer available is a semi-retired fellow who sized the beam in exchange for having a couple of beers with him in the process. ... View more questions Search
|