 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am having a tough time getting the drain out of a fiberglass tub. I bought a drain key and still can't get it to budge. I'm concerned, trying not to damage anything. Would heat or something help to loosen up that old plumbers putty? Thanks!
I have a "plumbpak" brand foot lock tub drain purchased from Lowe's. The tub is starting to drain slowly. I don't want to use liquid plumber and my enzymatic drain cleaner is not doing the job. Can I take out the stopper on this without removing the whole assembly from the tub? I want to see if...
There are many posts about my problem but I need to take it to the next step. Need to remove a Watco tub drain shoe already have removed the push/pull stop then tried to remove shoe but the corroded cross bars broke off easily. Purchased a Ridge #342 internal wrench but still will not break...
We live in a manufactured home and need to replace the bathtub foot lock tub drain system. We've taken the top off (easyenough) but don't know how to remove the plastic cylindar and whatever else is connected to it. I've looked all over the internet but the only discriptions I can find are the...
Run water in tub drains. Fill tub does not drain use snake but its still the same
View more questions Search
|
