Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Should I use cemented PVC or PVC sections for main sewer line?
[ 5 Answers ]
I'm replacing the main sewer line for my 1850's house located in Quebec, hence cold winters and the risk of shifting due to freeze thaw cycles. The line was previously replaced, and is now a series of three feet long 6 inch concrete sections connected together. I was planning on installing PVC...
Remove lead and fit pvc to cast iron
[ 1 Answers ]
I have a house built in 1890. During our kitchen & bath remodel I've had to cut out and replace the 2nd floor bathroom floor and joists. The new double joists are in. The old toilet flange is 15 1/2" from the wall. I want to move the toilet about 3''. The pipe for the toilet is a lead elbow going...
How do I remove cemented pvc pipe from cast iron hub?
[ 7 Answers ]
Hi, I am doing a bathroom remodel and this includes moving the toilet to the opposite side of the soil stack from where it is now. I have read all about using Fernco donut etc. to install a new PVC pipe into my cast iron hub but the problem I have is that the current PCV pipe that is attached...
Remove PVC pipe from cast iron
[ 2 Answers ]
I have an AC condensation drain pipe that is cloged with too many elbos to snake. I need to remove the PVC pipe from the cast iron nipple that comes out of the Air Conditioner. How can I do this with out breaking the PVC? View more questions Search
|