Ask Experts Questions for FREE Help !
Ask
    whcook's Avatar
    whcook Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 29, 2016, 03:57 PM
    Briggs stratton pulley removal
    How do I remove the pulleys from the shaft on a b/s engine 287707/22401 ?
    paraclete's Avatar
    paraclete Posts: 2,706, Reputation: 173
    Ultra Member
    		  
    #2

    Apr 30, 2016, 08:46 PM
    Look on Youtube for a "how to" video. There will be a small metal key on the shaft that you will have to remove/dislodge
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and stratton pulley [ 0 Answers ]

I have about a 1985 Murry lawn mower with a 4 horse b & s motor and needing to change the recoil pulley. How can I do this?

20 HP Vtwin briggs engine pulley removal? [ 3 Answers ]

I have a 20 HP Briggs that needs the engine pulley removed. There were two pulleys on the shaft. The lower pulley was removed by simply removing a bolt at the lower end of the shaft. The upper pulley looks to be keyed for the shaft. I can not get this pulley to come loose. I have tried about...

Briggs and stratton 300 148cc pulley start problems [ 0 Answers ]

On my three year old mower I have a pull cord to start. This is traditional of a push mower. When I pull the rope the engine locks and the rope will not move. I took the top housing off and the rope cylinder moves fine. The rotary assembly that starts the engine moves freely. When they are...

Briggs & stratton starter motor cog removal [ 1 Answers ]

Is it possible to remove the plastic cog without removing the starter motor from the Vanguard Briggs & Stratton engine as previous posts suggest it is difficult to remove starter motor. Thanks

Briggs and stratton pulley [ 1 Answers ]

I bought an '85 Murray Mower and it needs a new stacked pulley, part number 90329z. They are discontinued and I need one. Any idea for sources? Thanks Steve

View more questions Search