Ask Experts Questions for FREE Help !
Ask
    Hollygirl's Avatar
    Hollygirl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 22, 2016, 06:46 AM
    Ke more Quiet Guard 665.15632 it stops after the wash a
    Have Kenmore Ultrawash quiet guard 1. It stopped after the wash cycle and just has blinking NORMAL WASH button. Model 665.15632
    I was able to push Cancel/drain and it emptied. Tried to run again on Normal wash and washed and came to same point. Blinking light
    I tried turning off the circuit for 5 min. No luck
    How can I reset?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Apr 23, 2016, 06:29 AM
    Several articles describe the reset process, like this one,

    Kenmore Ultra Wash Diagnostic Code Reset – Clean Light Flashing - GinormaSource Home

    And some helpful videos to guide you, starting with this one,

    https://www.youtube.com/watch?v=nX-rxbvW57Q

    And followed by others that are very instructional. (See list on the right, but they run automatically)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite quiet guard ultra wash dishwasher 665.13123? [ 0 Answers ]

The cancel button is the only button that will work on my Kenmore elite quiet guard ultra wash dishwasher 665.13123. Any suggestions?

Kenmore ultra wash dishwasher model 665.15632 only runs on the cancel, nothing happen [ 0 Answers ]

Our dishwasher only "turns on" when you hit cancel and no water. When you hit start or any other buttons nothing happens it just stops and nothing.

Kenmore ultra wash model 665.15632 needs reset. How do I do it? [ 0 Answers ]

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

View more questions Search