Ask Experts Questions for FREE Help !
Ask
    rayin9's Avatar
    rayin9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 19, 2016, 05:50 AM
    Electric water heaters
    Where is the anode rod if it is not visible it should be on top
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Mar 19, 2016, 06:55 AM
    The anti corrosion anode is inside the tank, access from the top of the tank.

    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Mar 19, 2016, 09:29 AM
    Look on the top of the tank, there should be a large nut, 1 1/8". Lots of torque needed to get the nut loose
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant electric electric baseboard heaters [ 1 Answers ]

I have an 8' /2000 watt Bryant heater from a past home that I will install with a wall thermostat for backup heat in a 240 sq. ft room. I have a 30' wire run and have 10-2 wire and 30AMP double breaker. Will it be OK on the wire and breaker. Thanks Fred

Cambridge electric heaters electric use cost [ 1 Answers ]

How much does it cost too run heater?

Electric Baseboard Heaters [ 1 Answers ]

What types of electric baseboard heaters are available? What are each of their merits? Who carries the various types?

Electric Baseboard Heaters [ 2 Answers ]

Hello All. I have electric baseboard heaters in every room in my 2 bedroom apt. I tried to do some research on the ones that I have.(Federal Pacific) No luck. Not sure how old they are either. It seems that in order for the apt to reach a comfortable stage, the stats are on 80' all day. I...

Electric baseboard heaters -wiring 1 thermostat to two heaters [ 2 Answers ]

I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...

View more questions Search