Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove a broken galvanized pipe stuck inside a lead pipe?
[ 3 Answers ]
Mine is a broken pipe inside of the other pipe, I need to remove it, it is a pipe from the laundry to the main line, I think 2in into 4inch? Is it threaded? Or solid? Can I use the saw to cut in pieces and tap out?
Remove inner pipe of well that is stuck in well
[ 5 Answers ]
The inner pipe will not move it like stuck will not break free from the well itself??
Drain King Nozzle Stuck in Drain Pipe
[ 8 Answers ]
I have a Drain King #501 nozzle stuck in a 1-1/2 drain pipe at a T joint. The nozzle and hose inserted easily past the joint for several feet and cleared the clog in the drain pipe. I turned off the water and was able to pull the hose out until the nozzle came to the joint. It will not come out...
Drain king nozzle stuck
[ 4 Answers ]
Drain king nozzle stuck in straight pipe 8" down from kitchen cabinet floor, seems to be some ridge that I can't pull the nozzle back through........ I cut the pipe under the sink to try to get to the nozzle and that is how I was able to measure how far down the obstruction is..........if i cut...
Galvanized Pipe Stuck
[ 4 Answers ]
http://mysite.verizon.net/fdraw/pipe.jpg Rusted galvanized pipe nipple is stuck in fitting in wall behind tile under bathroom sink. :( I have tried to remove it with a large pipe wrench, but it won't turn. I looking for any suggestions to get it out without damaging threads in fitting; WD40?... View more questions Search
|