Ask Experts Questions for FREE Help !
Ask
    talbott9644's Avatar
    talbott9644 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2016, 10:22 PM
    GE Microwave stopped working
    My GE Microwave sounds like its on, however the carousel stopped turning and nothing is getting hot. This is a GE Combination in wall oven and microwave unit.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Mar 3, 2016, 11:24 PM
    Well if you can get it opened, that get to the inside, you could look for a blown fuse. Be very careful you can get shocked even if it is unplugged.
    Other than replacing a blown fuse there is nothing you can do .
    Call a repairman.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My airconditioner is not working. The auto stopped working [ 1 Answers ]

The auto stopped working and the fan would freeze the outside up. Then it all stopped working. The outside would only come on for a few minutes and the blower motor fan starts and slows down and keeps doing that. I replaced the thermostat and that didn't work. Now when I turn it on the blower motor...

LG Microwave not working [ 3 Answers ]

I have a LG under cabinet microwave LMVM2075SW that has stopped working. I think it is the magnetron. The timer works and counts down when started, the light turns on but nothing else happens. Can someone please help with any other possible causes for it not working. Thanks Bwilly

Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working [ 2 Answers ]

I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...

Microwave not working [ 4 Answers ]

Question what could be the problem for a stainless steel microwave model brand is Emerson the clock is working and programmable,But when I enter time to cook and press start button nothing happens I will not cook at all.

View more questions Search