Ze268s6 fan switch

rayhanderson Posts: 1, Reputation: 1

New Member

Jan 15, 2016, 12:11 PM

Ze268s6 fan switch

I have a hunter fan with two capacitcors. Wire colors are black, green, brown, and grey. All wires except the black come from one capacitor. The switch is a zing ear 268s6 with markings: "l", "1", "2" and "3". Where do the wires connect?

Check out some similar questions!

ZE268S6 Ceiling Fan replacement switch [ 1 Answers ]

I replaced my ZE268S6 ceiling fan speed switch with a Lowe's 33905 but now the fan only gives me High -Low-Low. Is there a different replacement part I should use? The original problem was the speed switch was doing Hi- OFF- Low.

I had a ceiling fan with a broken pull chain switch. I removed the switch and connect [ 0 Answers ]

Ceiling fan wiring

Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan [ 1 Answers ]

I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

Connect ceiling fan wires to ZE268S6 pull chain switch [ 2 Answers ]

I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...

View more questions Search

Check out some similar questions!

Add your answer here.