What does e3 mean on a emerald aire split unit ac

drugz Posts: 1, Reputation: 1

New Member

Jan 5, 2016, 10:40 AM

What does e3 mean on a emerald aire split unit ac

Air condition stop work and only displays e3

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Jan 5, 2016, 02:35 PM

That is a code telling you something is wrong. Owners manual or on a chart on the unit should tell you.

Add your answer here.

Check out some similar questions!

CID 14K HDS Emerald cut emerald solitaire with 12 diamond accents [ 0 Answers ]

I bought a ring that has a emerald cut Green stone (I think real Emerald) and 12 Diamond accents... 6 on each side of the emerald. Inside the band it is marked CID... 14K... HDS... then it has 319 116 on the other side of the band. ANY IDEA ON WHAT THESE MEAN? I was told that the HDS is for...

Why does my Central Air Unit (Goodman split unit) neither cool or heat my house? [ 6 Answers ]

It worked fine all summer until last few months. When I have it to cool it blows air but not cold air. Now that I want heat it blows cool air and not hot air. It took it 30 minutes to heat my 1000SF home from 64 degrees to 65 degrees. What could be the problem?

Coleman split unit outside unit- contacts will only engage manually [ 0 Answers ]

2006 Coleman air handler with king heat pump. Would not come on and no power to thermostat (blank). Found 3 amp fuse blown and replaced. Fan worked, switched working thermostat to cool and fuse blew. Another fuse holding contractor in and all works. One dark spot on contractor coil, but does not...

How to remove blower motor from Bard Wall Aire unit [ 0 Answers ]

My Bard Wall Aire 1 ton AC unit has a blower that is slow starting . The capacitor tests OK. Since motor starts after it is tapped , I'd like to replace it. There are two screws on the top Inside of the blower/motor unit that seem impossible to reach. How can I remove this blower motor ?

Wiring diagram for captive aire unit [ 3 Answers ]

Hello guys, howdy? I need help to connect remote summer/ winter switch for UL captive Aire model: (NHMUA 1-6-10 ) make-up air unit. It is old and used unit and the diagram is missing. Anyone news where I can find the wiring diagram for this unit. Please help Thanks