Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
An outdoor separated building with a concrete floor 10 inches thick and the humidifie
[ 3 Answers ]
Where is the water coming from and how do I stop it?
Shower floor depth varies where wall meets the floor
[ 3 Answers ]
We installed a shower floor kit to be used with tile which includes specific instructions for proper installation. After installing with the pitched level bars in place, we noticed that the areas along where the wall meets the floor along the widest portion of the shower floor has a lower pitch...
How do I attach a stud wall to a wooden floor without damaging the floor?
[ 4 Answers ]
I live in a rented house and want to partition off the dining room to make a new bedroom. The landlord says I can asd long as I don't damage the existing wood floor. I need to know if it is possible to attach a stud wall to a wooden floor without damaging the floor? So that if we leave and...
Tile floor or wall first
[ 3 Answers ]
Hey, I am ready to tile my new shower. I allresdy installed the pan and the hardie backer. Every thing has cured. I am using 1/2 tile (in 12x12 sheets) on floor and 9x13 on the walls. Should I tile the floor or walls first?:confused: Lee
1/2 wall to cement floor
[ 3 Answers ]
I am putting a 1/2 wall in my family room. The slab is 34 years old (very very hard cement). Someone told me to use gorilla glue. Not sure about how well that would work. Looking for some more ideas. Also, this half wall is going up 3 foot and out 6 foot. (not to ceiling or other side of room) How... View more questions Search
|