 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
As long as you have a wiring diagram, and tag your wires before you detach them from the old one you should be fine.
http://www.ntsupply.com/files/produc...fm_install.pdf Page 7 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Rheem HVAC unit, model #RRKA-A030JK10E. The air conditioning runs fine, but when I switch to heat it works when it feels like it. Sometimes it will blow strong when I turn it on, and other times the furnace will heat but the blowers won't turn on. I don't understand what is happening. ...
You are needing to select a blower size for a heating situation. The recommended total CFM should not be less than 400 CFM per 12,000 Btu/hr. What is the actual calculated CFM for a fan to be used on a heating load of 45908 Btu/hr. Round your answer to the nearest whole number.
Hi. I had a R410 HVAC system installed last summer. Everything was replaced (outside unit, furnace, lines, thermostat, etc). This summer on the first hot day, I turned on my system and it wasn't cooling. I called the installer back and he said that the R410 charge was slightly low causing the...
Are newer Trane units made in China by Haier?
Is it 100% true that for linesets longer than 15 feet that for every foot 12oz of refrgerant is needed?
View more questions Search
|
