Ask Experts Questions for FREE Help !
Ask
    dwurfel's Avatar
    dwurfel Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2015, 07:51 AM
    Overhead Door Model 556 won't operate with remote
    First the green light on the power unit circuit board flashes 7 times. I bought a new remote since the switch on my old one was worn out. I reset the dip switches. Went through the set up. The remote works for a few cycles then does not. Then mysteriously works then goes out again. Circuit board on the power unit circuit board still flashing 7 times. Help!!
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Dec 6, 2015, 09:46 AM
    Code indicates a misaligned photo cell or faulty wiring of photo cell.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Overhead garage door model 556 cannot come down automatically. [ 7 Answers ]

With the above model I have recently experienced failure of closure of the door with return to open position. I have to push wall unit switch all the way till door come down to close, then door auto go up again when it touch the ground which I need push switch again to ensure door is closed. I have...

Overhead garage door model 556 [ 0 Answers ]

I need to find out how to reprogram the wired key pad

Overhead Door, Model 556 [ 4 Answers ]

Overhead Door, Model 556 Question -- how to program the remote control?

Overhead garage door model 556 [ 0 Answers ]

My door on the overhead garage door model 556 does not come down automatically . I have to the push and hold the wall button to get it down. It does not response to the remote the light flash on and off. The photo cell continually flash.

View more questions Search