Does a ge bwe924g1000 furnace work with a honeywell rth2300 series thermostat

Check out some similar questions!

Wiring diagram for honeywell thermostat rth2300? [ 0 Answers ]

I'm replacing a very old Honeywell thermostat which has only 2 unmarked wires attached. Where do I attach them to my new rth2300?

My new Honeywell RTH2300 Thermostat is not working [ 2 Answers ]

Today I purchased a Honeywell RTH2300 Thermostat. Pretty simple I thought! Hooked up the Red Wire to the R terminal, White to the W terminal, Green Wire to the G terminal and the last color I had was a light blue wire, did not have a light blue terminal, but there was a O/B which I believe the O...

I just installed Honeywell RTH2300 thermostat and it is not functioning. Help! [ 0 Answers ]

I have an all electric unit with a hot water traditional tank. The wires coming from the wall connected to the old thermostat as follows: Red to R Blue to C Yellow to YY2 Green to G White to W The Honeywell customer care rep told me not to use the blue wire. He instructed me to connect...

Problem with Honeywell RTH2300 thermostat [ 0 Answers ]

Hello, I installed a new HOneywell thermostat in my house, heat only (2 wires: R & W). The thermostat is kicking the furnace/fan on for 10 second intervals, with 10 seconds in between, over the course of half an hour (usually when transitioning from cold to warm modes. i.g. leave to return). ...

Installing new Honeywell rth2300 thermostat [ 2 Answers ]

I just replaced an old digital thermostat with a new programmable honeywell. The wires coming out of the wall are as follows: Red White Blue Green In the old thermostat they were connected as follows: Red:Rh (jumpered to RC) White:W Blue:Y

View more questions Search

Check out some similar questions!

Add your answer here.