Weathermaker 8000/ burners won' ignite

Jerome Davis Posts: 1, Reputation: 1

New Member

Nov 14, 2015, 07:59 AM

Weathermaker 8000/ burners won' ignite

My furnace just stopped heating up. Wii turn on, ignite rod lights for a few seconds then goes out. Comes on again but no flame. What could this be? Where should I start?

Check out some similar questions!

Carrier Weathermaker 8000 won't turn on sometimes. [ 7 Answers ]

It will work fine for a day, a week,. Anyway it will drop to mid 60s on Tstat (cold for us, set on 75) and won't start. My Tstat is located in the hall with no vents nearby. Ill flip the switch to ac and ac will work fine. Fan comes on and all. Flip it back to heat and hear the click for the call...

Burners ignite but Won't stay on [ 1 Answers ]

I have a Tempstar furnace. It is a natural gas furnace and the gas valve and the electrical parts are Honeywell (Gas Valve VR8204M1075, Control Module ST9120C4057, Ignition Module S8600M1005). The furnace is about 10 years old. When I tried to turn it on for the first time this year it would...

Burners ignite but Won't stay on [ 0 Answers ]

I have a Carrier Weathermaker 8000, It comes on but the burners do not light up [ 1 Answers ]

Its comes on for about 15 seconds and then cuts off

Burners won't ignite--no gas? [ 1 Answers ]

Lennox model GMP075-3. Installed in '95. I've tried resetting according to instructions on access cover panel (turn heat to 'off', turn off power to furnace, turn gas valve to 'off' for 5 minutes, etc.) When I call for heat, small (induction?) fan runs for a few seconds, the igniter unit glows...

View more questions Search

Check out some similar questions!

Add your answer here.