HRV

Jakeho Posts: 1, Reputation: 1

New Member

Oct 6, 2015, 09:00 AM

HRV

Hey,
I need to replace the air exchanger in my 2100 square foot multi-level house tha currently has 4"ducting. The only HRV that I can find that would be sufficient have 5-6" ports. Is it safe to reduce these ports to match the 4" ducting? Thanks, Jake

Check out some similar questions!

HRV Fan system [ 1 Answers ]

Dear people , Please, help me to answer the question . I have HRV fan system installed in my new house .It designed for bringing the fresh air from outside but also draws moist air from 4 points at the same time : from 2 upper bathrooms , 1 powder room and a basement bathroom . Can I ask you ,...

Where is the DTC in a Honda hrv 2000 [ 1 Answers ]

Where is the data link connector located in a Honda HRV year 2000

Wire HRV to control Furnace Fan [ 7 Answers ]

I have recently installed a Venmar HRV. The control panel for this unit offers an Automatic setting where the unit will stop for 40 minutes and run for 20 minutes each hour. I would like to connect the HRV to my furnace so that it turns the furnace fan on for this 20 minute period. How can I...

Conntecting vennmar hrv he 1.3 to a infinity controler [ 1 Answers ]

I have a carrier infinity ics gas furnace with a vennmar hrv he 1.3. I just had the carrier inifinity controller installed, and noticed after the cooling call the blower shuts down as well. After 5 minutes it starts up again. The hrv was and still is interlock to this furnace

Hrv intertherm gas furnace,mobile homes [ 3 Answers ]

Does the above mentioned furnace come with a built in hrv?

View more questions Search

Check out some similar questions!

Add your answer here.