Ask Experts Questions for FREE Help !
Ask
    RFD's Avatar
    RFD Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2015, 02:34 AM
    Hampton Bay Campbell w remote - lights/motor don't work bulb popped
    Less than year old Hampton Bay Campbell series with 3sp remote w dimmer

    Long story short, popped a bulb and melted a light socket, now whole unit dead, motor and lights inop, pulled light kit, found 2 wire black capacitor (wattage limiter) smelled burned, called Hampton Bay - they SOLD me a $20 light kit which had no 2 wire box, weeks later still no capacitor fail, went to home depot they gave me one out of box, installed and whole unit still dead. I am unable to locate a fuse for this unit, I was assuming the capacitor was the fuse, is the fuse in the receiver in the mount? Or is the receiver fried?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 23, 2015, 09:26 AM
    Wattage limiter is not a capacitor. What wattage light bulbs did you have in place?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My hampton bay remote works only for the fan and not the lights? [ 1 Answers ]

My question is how to fix the problem with a remote - The Hampton Bay Ceiling Fan Remote works for the fan perfectly but recently stopped working for the light fixture - will not turn on or off the lights? Do we need a new remote?

Sorry, but I've got a Hampton Bay with remote and the lights quit working. [ 0 Answers ]

The lights on the Hampton Bay I have in my office at home stopped working (I use a remote and there are no pull chains) When I press the button for the lights, the light on the remote does not come on, nor do the four 60 watt lights on the fan (the fan function works fine, and the little light on...

Hampton bay patio lights and my remote broke where can I purchase one [ 1 Answers ]

Where I purchase a remote for my hampton bay patio ights

Hampton Bay Fan Installed and Working BUT All Other Lights on Switch Board DON'T WORK [ 1 Answers ]

I bought and installed a Hampton Bay Fan w. remote (Model 04889). After I wired the fan and tested it, nothing happened except the other lights connected to that circuit breaker flickered. I turned the power off and checked my connections. I realized I switched the two black wires on the remote...

New hampton bay motor not working, lights work [ 3 Answers ]

Hi - I just installed a new hampton bay carriage house II 52" ceiling fan with light assembly (no remote; pull strings for lights and fan, and two position fan switch). I used the wiring from a previously existing ceiling light. I tested the wiring by running them to a grounded plug assembly,...

View more questions Search