Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
LED lights - battery to DC voltage
[ 2 Answers ]
I have 5 sets of L E D icicle lights. Each set is intended to be ran from (4) "D" cell batteries. Each string has 5 icicles, and the battery box says - DC 6.0v---. I believe the batteries are in series, a black wire from the switch starts the circuit and the power goes through each battery until it...
Wiring cables to low voltage landscape light tranformer.
[ 2 Answers ]
I'm a do it yourself homeowner. I ran three separate low voltage lines to some uplights for my palms. Each line has 3 uplights. I have all of the lines returning to the outdoor GFCI on the house. The cable I used is low voltage 12/2. The transformer I am using is a Intermatic ML300RTW. I am having...
I have a buzz in my low voltage lights
[ 0 Answers ]
I have 2 recessed Elco can lights (both low voltage w/ electronic transformers) and 2 pendant lights, also electronic transformers, with xelogen bulbs. I had an low voltage dimmer (electronic) installed and experienced a constant and loud buzz. I put in a regular incandescent dimmer and now only...
Track lights: low voltage vs line voltage.comsume the same electricity in the end?
[ 11 Answers ]
Hi! I just installed a section of track light in my living room just to see what it would look like and so far I'm not convinced... you see, I had a regular celing lamp with a 75w incandescent bulb and the room was very well lit... now with the track light I find that I need 3 fixtures with halogen...
Dimming of low voltage lights
[ 7 Answers ]
150 amp underground service 3 wire 150 amp 30 circuit panel .The branch circuit is a 15 amp 14/3 with ground . 14/3 feeds to a 4" round box , 1 circuit feeds through to another branch circuit in the house , the other circuit feeds a pull chain fixture that has a compact fluorescent lamp in it.... View more questions Search
|