 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Just installed a new delta r1000 faucet. All was working well until I tried to tun the cartridge around so the hot water side was on the left. Now no matter which way I install the cartridge the hot water will not stop running completely when the faucet is turned off. Washers lol good and seem to...
I have a under mount sink in granite counter top. The 1/8 inch thick edge of the sink (at top where it sticks with the counter top) does not let faucet mounting bracket to rest flat with the counter top. I am unable to tight the nut and the faucet is little loose. Any body have any idea what need...
Sir: Recently I installed a Moen cartridge in a bathroom sink faucet, after which the cartridge worked well. A few days later, when turning the handle right as you look at it in order to get cold water, a loud noise would emit almost like their was air in the pipe. The water pressure would weaken. ...
I am wanting to install wall mounted sink faucets. I have a couple of questions. 1 - do I still run a shutoff valve under the sink and then feed the pipe back into the wall and up to where the valve is? 2 - prices range widely from 500+ for a Kohler to < 100 on eBay. They both look nice but...
I am installing a drop-in whirlpool. My wife has shown me design book pictures of two handle tub fillers installed with the spout in a different location away from the handles. Can off the shelf deck mount tub filler kits from Kohler or American Standard be adapted to this kind of installation or...
View more questions Search
|
