Ask Experts Questions for FREE Help !
Ask
    rgonzalez's Avatar
    rgonzalez Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 14, 2015, 11:05 AM
    Luxair split unit
    I have a luxair split unit model ASGL-30R2 I AM GETTING A CODE P2 WHAT IS THE PROBLEM

Check out some similar questions!

Split a/c unit not working [ 0 Answers ]

My nordynegibson a/c unit just quit working, one minute blower was on next nothing and condenser outside wouldn't switch on neither. Changed out capacitor and contactor switch on condenser , but still nothing. Getting power to the circuit card from inside unit but it appears that the thermostat is...

Why does my Central Air Unit (Goodman split unit) neither cool or heat my house? [ 6 Answers ]

It worked fine all summer until last few months. When I have it to cool it blows air but not cold air. Now that I want heat it blows cool air and not hot air. It took it 30 minutes to heat my 1000SF home from 64 degrees to 65 degrees. What could be the problem?

Coleman split unit outside unit- contacts will only engage manually [ 0 Answers ]

2006 Coleman air handler with king heat pump. Would not come on and no power to thermostat (blank). Found 3 amp fuse blown and replaced. Fan worked, switched working thermostat to cool and fuse blew. Another fuse holding contractor in and all works. One dark spot on contractor coil, but does not...

A/c split unit [ 1 Answers ]

Hi my a/c split unit will not run, it has two capacitors for the fan units, and following power problems and a possible surg of power back on. The 240 volts are OK on the supplies, but I also have 240 volts at the Nuetrals too, is this correct.

Luxair 5 ton condensing unit wiring schamatic [ 1 Answers ]

I have a 7 year old 5 ton Luxaire condensing unit and I would like a copy of the wiring schamatic; where can I go to get it?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.