Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Chevy truck won't start
[ 3 Answers ]
Its has a 350 engine with good cranking when turn key but won't fire.it has no spark.. replaced ignition module,plugs & plug wires.. had coil tested which they said was good. Any advice on where I should go from here?
74 chevy truck will turn over but won't start. Will start with starter fluid but won't
[ 1 Answers ]
My 74 chevy pickup sat over the winter and now it won't start. I was running just fine before I let it sit. It turns over but won't start. If I use starter fluid, it will start but won't stay running. I don't smell gas in the carb either. I'm thinking it's the fuel pump or the filter. Problem...
1974 Chevy Truck Brake Bleeding
[ 6 Answers ]
I replaced the master cylinder. I did the bleeding on the new one on the bench and lost almost no fluid during the installation. The brakes feel fine. The master cylinder is way above anything else in this brake system. Since the small amount of air is at the top of the lines where they enter...
1974 Ford F100 Turns Over But Won't Start
[ 1 Answers ]
I have a 1974 Ford F100 Styleside, 2WD, automatic, 390 engine. It will crank but not start. The last time it started, it died, smelled flooded, and hasn't started since. I have replaced the spark plugs and wires, the coil, the ignition module, and the fuel pump. When I try to start it, it turns...
1974 Chevy truck will crank but won't start
[ 10 Answers ]
Truck lost power while driving down road. Will crank now but won't start. I replaced ignition coil, point and condenser... roter turns. Any suggestions? View more questions Search
|