Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Diamond york heating pilot light will not stay lit
[ 0 Answers ]
The batteries died in the thermastat control. I replaced the batteries, but now I cannot get the diamond york heating unit to work if I press the ignighter button nothing happens... if I hold the ignighter down everything starts to work, but once I release it everything shuts down again
Heating-air-conditioning/troubleshooting-york-diamond-80?
[ 0 Answers ]
My York Diamond 80 furnace is blowing cold air. There is an indicator blinking twice. Is there a way to reset?
Furnace is heating home but is short-cycling with weather extremes
[ 1 Answers ]
Okay, so my furnace is fairly new (just over a year), and we had this problem for a short time when it was first installed but thought we'd fixed it. The issue is that the furnace will come on, will be blowing hot air (or cold, during the summer), but will go off after 90sec. It will come right...
York heating and cooling systems
[ 1 Answers ]
My York air conditioning uniting is not blowing cold air and the fan in the outside unit is not turning on when I activate the unit.What could be some the possible causes?
2001 York diamond 80 HVAC blower fan stops after 20 seconds (not in heating/cooling)
[ 2 Answers ]
Just had the HVAC serviced (inspected) by firm that tightened loose wires outside, checked outside unit and inside blower, noting only slight dirt buildup on blower. Unit ran fine during tests. Next day, 2001 York diamond 80 HVAC blower fan stops after 20 seconds in the on position (not in... View more questions Search
|