Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier furnace: limit switch fault furnace has ignition but blower will not come on?
[ 2 Answers ]
Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?
Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why?
[ 0 Answers ]
Blower motor on all the time. No heat from furnace. Why?
Tran furnace / air main blower on furnace will not run. But the a/c unit runs
[ 0 Answers ]
Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not
I have a trane eletric ignition heater and blower furnace is heating up but no blower
[ 1 Answers ]
My thermostat is a white /rodgers module this clicks to start but no air blowing from the furnace in the attic which is a trane model and the same with cold air the thermostat clicks the ducane model outside whirs but no cols air.
Furnace Blower Motor Runs Constantly & Furnace or AC Won't Run
[ 2 Answers ]
I have an Armstrong forced air (induced draft) natural gas furnace with central AC (made around 1990 -- Model: EG6H80DC14-1, Serial: A18315MNA). I had a problem at the end of the heating season where the blower motor would run continuously (even when the thermostat is turned to "off"). I thought... View more questions Search
|