Ask Experts Questions for FREE Help !
Ask
    jmcmeow's Avatar
    jmcmeow Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2015, 10:10 AM
    Cool setting will not stay on
    When the cool setting is on, the cool icon keeps blinking. No cool air is coming out. Is there a problem with the thermostat or the central air unit?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 14, 2015, 05:01 PM
    Could be either. Need to have a tech look at it. Does the heat work? Batteries OK, if so equipped? There are many possibilities from a bad compressor to a broken wire on the thermostat line.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my Inglis electric dryer run only in the cool down setting and not heat? [ 1 Answers ]

Checked all thermostats, thermofuse and element and all are good

Another Expert Needs to Stay Cool [ 13 Answers ]

Greetingsfrom the Plumbing Page, Here's my problem. Back in 87 I swapped my old pot type oil burner for a air handler and heat strip. This air handler is what the AC company was installing on the condos where I was the plumbing foreman. I used a 2 ton wall banger for the next 20 years to cool in...

Cost to Stay Cool [ 2 Answers ]

What is a reasonable price for replacing a compressor in a RUDD air conditioner-- Compressor cost & Labor?

Heat Pump Doesn't cool, even heats up whenon Cool Setting [ 4 Answers ]

About a 10 year old "YORK High Performance" heat pump... The heat pump was set to Cool for my summer AC and usually has been working well. At noon on a warm day it stopped The element inside-blower with the freon (sp?) would not get cool and for short times heat up blowing warm air in an...

View more questions Search