Ask Experts Questions for FREE Help !
Ask
    jyobis's Avatar
    jyobis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 12, 2015, 07:54 AM
    Little junk in upper hole area of the bathroom sink
    Hi, I am seeing little junk spots on the upper hole area of the bathroom sink. What would be the cause and what would be the best solution ? Any suggestions please.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 12, 2015, 09:06 AM
    Upper hole, could you be more specific? Do you mean the over flow? If so spray with tile cleaner with bleach and let it soak for a few minutes before brushing it out.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    May 12, 2015, 04:08 PM
    Yup, bacteria and mold... found in most sink overflow holes! Bleach tile cleaner should definitely do the trick for you as Ballenger pointed out!

    Good luck

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Touch up or repaint nickel plated sink drain hole edge inside sink [ 2 Answers ]

A cleaner corroded the chrome off the new circle of chrome (nickel plated) at the bottom of the bathroom sink. Can we recoat with paint?

Bathroom sink leak. High, near stopper hole [ 10 Answers ]

Bear with me as I searched and found many informative posts about bathroom sinks and several about stoppers and stopper replacement, but I didn't find my particular issue. If I get underneath the sink and shine a flashlight up, I can clearly see the point of my leak. It is a small leak but if I...

Can I fix a hole in metal pipe under bathroom sink? [ 10 Answers ]

Just the other day after cleaning out a clog in the bathroom sink, I noticed it started to leak and after inspecting it I saw that there is a hole in the metal pipe. The hole is on the lower part of the pipe (on the lowest part of the J shape that forms it) - it looks like the pipe is corroded....

View more questions Search