Ask Experts Questions for FREE Help !
Ask
    DennisGreen's Avatar
    DennisGreen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2015, 01:27 PM
    How do you remove/replace a Grohe Atrio faucet handle?
    I have a Grohe Atrio faucet handle. It has fallen/been pulled off by one of my kids. I can see a screw inside, but I don't know how to get to the head of the screw.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 27, 2015, 01:41 PM
    Show us a picture. Most of the time these screws are set screws and require an Allen wrench.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Apr 27, 2015, 02:53 PM
    Hello DenisGreen,

    Yep I agree with Harold post a picture will help, if you can see the screw please tell if it is a Phillips head, Allen head or Hex head, Thanks.

    John
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #4

    Apr 27, 2015, 07:56 PM
    Is it cross handle of lever handle ?

    Grohe utilizes 2 ways of attaching handles. If the handle has removable button in the middle of cross handle then either try to unscrew it or pop-it out. There you find brass screw that holds handle on the stem.

    Or they also use type of handles where the handle is simply pushed onto the stem. There, it snaps onto a plastic tip which holds handle in place. No screws used. If that is the case, grab the handle and pull hard straight away from the stem.

    Same goes for lever handles. If you see no button or set screw, handle is simply pushed onto the stem with now screw to hold it in. It removes same way as described above.

    Hope that helps

    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Grohe faucet handle [ 10 Answers ]

I have a Friedrich Grohe Bathroom faucet model 88-04-L. It is a single base unit with angled handles on each side. How do I take off the handles to check/replace the faucet washers? There does not appear to be any hex screw or phillips screw to loosen the handles from the top.

How do you replace handle on ladylus faucet by grohe [ 1 Answers ]

I broke the screw holding handle off and have about 3/4 of an inch still inside. How do I get it out?

Grohe faucet handle removal [ 23 Answers ]

Kitchen prep sink faucet has two handles. No removable caps to get at screw to remove handles. How do you remove the handle(s) to fix a leak coming from the faucet spout?

How do you remove the Handle from a Grohe Lady Lux Kitchen Faucet? I have included a [ 3 Answers ]

http://www.grohecatalog.com/product/33759g A link to a picture of the faucet above.

Grohe faucet handle removal [ 1 Answers ]

View more questions Search