Ask Experts Questions for FREE Help !
Ask
    Jaybeach's Avatar
    Jaybeach Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2015, 09:44 AM
    How do I turn on a disconnected circulator pump and refill a heat zone with water.
    Hello

    I need help!. Although my wife says I am beyond help!

    MY 3RD FLOOR CIRCULATOR PUMP(I have 2 other circulator pumps for the 1st & 2nd floors) has been disconnected & drained for the past winter. I had a ball valve installed on the line that feeds the 3rd floor zone from the boiler, which has been in the off position. Now, I want to refill the zone to check for leaks, What do I have to do?
    Grady white has been a big help to me & has advised me in the past..

    Thank you all for your consideration on my behalf.
    [email protected]
    Jay Beach

Check out some similar questions!

Basement infloor hot water circulator pump seems like humming but it's cold [ 1 Answers ]

Hi, My basement infloor hot water heating circulator pump is humming but both suction and discharge lines are cold .The similar pump for upper levels is hot. Is it a problem with impellor ? Has it been worn out ? It seems like no blockage in the lines , the well...

Recommend drop in replacement for hot water circulator pump Grundfos Type UP15-18SU? [ 0 Answers ]

Can someone recommend a drop in replacement hot water re-circulator (open loop) pump for a Grundfos Type UP15-18SU which has failed. I want to switch to a stainless pump given hard water. Any suggestions? Thanks! -phil

How do you turn on the circulator pump without turning on the burner? [ 0 Answers ]

I just want to be able to turn on the circulator pump without the burning turning on. Is there an easy way? Are the circulator pumps DC or AC? How many volts if DC?

I drained my water heater and it won't refill. Still pressure in the water pump. [ 5 Answers ]

No water pressure

2 zone oil heat, 2nd zone runs 1st zone [ 1 Answers ]

Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.