Ask Experts Questions for FREE Help !
Ask
    bdcjwagner's Avatar
    bdcjwagner Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 11, 2015, 06:24 PM
    Furnace will not stay running
    I have a 1980 Payne Model 396GAW00075 furnace and it will start up, the fan comes on and run for about 3 min. then the burners will shuts off and about 30 sec. later it will turn back on. It will do this about 4 to 5 times then stay off until you shut the power off to the furnace and wait for about 30 min. and turn it back on. It will then repeat the same cycle. I have repaced the thermostate, cleaned the pilot and electronic ignition probs and checked all the electrical connections. I have cleaned the burners and furnace every year since 1994 so I am a little familiar with it, but it has me stumpped this time. Please help

Check out some similar questions!

Lennox furnace will not stay running [ 2 Answers ]

Our lennox furnace will run for a minute or two then shut off. A service man can in the summer to service the a/c, the heat worked fine last winter, can you help

Gas furnace won't stay running! [ 8 Answers ]

Hello, I have a Tempstar gas furnace model# NDN6050FBA1, It runs for 1-2 minutes then shuts off. I can hear the fan turn on, gas ignite, and then the blower motor. It doesn't run long enough to heat up and of coarse we are experiencing freezing temps. I wonder if my thermostat is going bad? Any...

Goodman Furnace won't stay running [ 3 Answers ]

I have a goodman furnace that won't stay on.. the glow plug comes on and ignites the heat box, it will run then shut off... after it gets to desried heat,, then when you try to get it to run again it's like it shuts down after igniter being lit for about 10 secs, I've replaced batteries in...

Furnace won't stay running [ 1 Answers ]

I have a goodman furnace that won't stay on.. the glow plug comes on and ignites the heat box, it will run then shut off... after it gets to desried heat,, then when u try to get it to run again it's like it shuts down after igniter being lit for about 10 secs, I've replaced batteries in...

Kerosene furnace won't stay running unless . [ 1 Answers ]

I have a kerosene furnace that needs to be bled every time in order for it to run what could be the problem (I have 1/4 tank of fuel ):confused:


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.