 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I'd really appreciate some assistance in how to go about replacing the thermocouple in a rather old Green Colonial furnace. The thermocouple is looking very scorched and will not keep the pilot lit. I've managed to unscrew the fitting from the small tube at the bottom but am not sure if the...
Hi, I have a Whirlpool water heater, and the thermocouple went out on it. Thinking it would be an easy fix I went to the store to get one and found that my particular model could not be replaced because it is a widespread issue and Whirlpool is offering conversion kits to solve the problem. ...
How much should it cost to have thermocouple replaced on a hot water heater?
I have a Lennox G12 furnace, about 20 years old, still working well except for the pilot light which has its off moments when it keeps going out. These seem to be periodic in that it will stay on for quite a time then start going out again for a few days, after which it works OK again. I have had...
Specifically - I have a State Industries, Inc. Censible 510 Model PRV 50 PBRT6 F 50 gallon gas water heater dated 1991 (S/N E93760685) and I want to replace the thermocouple. Usually, a thermocouple simply slides in/out or has a screw base to hold it in place - this one does not or at least I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
