Ask Experts Questions for FREE Help !
Ask
    livings's Avatar
    livings Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 8, 2015, 02:54 PM
    Hampton bay fans manual no pull chain
    My remote works with the reverse and fan but with dimmer on the remote.

    I have a Hampton Bay ceiling fan with a reverse remote for the fan plus it has a dimmer for the light (not a pull chain). The remote works with the fan but not with the dimmer. I changed the battery and this problem started.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Apr 8, 2015, 03:06 PM
    Try this reset for your remote. Let me know if it works correctly.

    How to Reset My Ceiling Fan Remote (5 Steps) | eHow
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay diagram for pull chain switch [ 1 Answers ]

Removed pull chain switch and forgot to write down wire position on 4 wire, 3 speed & off. Wire colors are Black, purple, orange & yellow. Please help

Hampton Bay Ceiling Fan - Pull Chain [ 6 Answers ]

Ok, so I got a little huffy last night holding the baby and toys while trying to find the number online to call ahead for seating at Texas Roadhouse. I pulled too hard on the fan pull chain and sure enough it broke off at the start of the chain, I was sad to see the connector piece attached to...

Replacing Pull Chain on Hampton Bay Ceiling Fan [ 2 Answers ]

I have a Hampton Bay Ceiling Fan. It has two pull chains, one for the lighting, one for the fan. The pull chain for the fan was pulled off by force, so it would appear (most likely by my 9-yr old son). Everything is working fine, but the chain is off and I don't know how to reconnect it (the fan...

Hampton Bay Fan Pull chain [ 1 Answers ]

The pull chain came out of the housing . I have it apart . How do I put the new chain in . It's spring loaded & I'm not sure how it's done .

Hampton Bay pull chain [ 3 Answers ]

I disconnected all 4 wires from the pull chain before writing down their configuration. I have 2- black wires, a red wire and a blue wire. My new pull switch is labeled L - 1 - 2- 3. Does anyone know the wiring configuration?:confused:

View more questions Search