Ask Experts Questions for FREE Help !
Ask
    Jimbos55's Avatar
    Jimbos55 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2015, 03:56 AM
    Correct Tool to remove Nut Underneath Cystern
    A complete novice so forgive me !

    I need to replace my toilet syphon (which I have brought)
    I need to loosen the nut underneath the cystern
    The adjustable wrench I have are too small - biggest being jaw size 10"
    What is the correct tool for this job ?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Apr 5, 2015, 06:03 AM
    Get a bigger wrench, they are not that expensive, or hard to find.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Apr 5, 2015, 06:30 AM
    The correct tool is called an adjustable spud wrench (Google it... hard to find locally), or you could just use a 16" pair of water pump pliers (readily available at all home improvement stores).

    Mark
    Jimbos55's Avatar
    Jimbos55 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Apr 6, 2015, 07:22 AM
    Quote Originally Posted by massplumber2008 View Post
    The correct tool is called an adjustable spud wrench (Google it... hard to find locally), or you could just use a 16" pair of water pump pliers (readily available at all home improvement stores).

    Mark
    Thank you for that reply - exactly what I needed
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drain pipe needs the correct nut. [ 6 Answers ]

I have an old metal pipe coming out of the wall barely under my bathroom sink. The nut that was on this pipe and the pvc that went to the j bend of the drain was so corroded if fell apart when I tried to unscrew it. What can I use that will fit over the 1 1/2 metal pipe going to the 1/14 pvc drain?...

What is the size of the nut to remove the pto clutch [ 1 Answers ]

What size socket is the nut to remove the pto clutch on a john deere 145

How do remove old fill valve with no plastic nut? [ 5 Answers ]

I agree with Annie, what a great forum! I thought changing the fill valve would be easy breezy. There is no plastic connecting nut under the tank. It's all metal. The tube is metal as well. I've loosened the metal nut as far as I can so that the old fill valve wiggles. But I don't know how to...

How to remove a nut from a cast iron pipe [ 3 Answers ]

I have a bath sink drain that tied into the cast iron vent pipe. The 1.5" lead pipe broke right at the point it tied into the vent pipe and it looks like a fitting that just screws into the vent pipe. I cannot get that loose. Any ideas on how to do that? Another option I was considering... can...

Should I remove mortar bed underneath tile? [ 9 Answers ]

I am remodeling my main bathroom and I am planning to replace the ceramic tile floors. The existing floor is mosaic tile in good condition except it is outdated and my wife can't stand the look anymore. Under the tile is an 1 inch mortar bed on top of plywood. The floor is very solid, but I want...

View more questions Search