Ask Experts Questions for FREE Help !
Ask
    mohamadqa's Avatar
    mohamadqa Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 3, 2015, 07:30 PM
    Write varley loop test to find fault in cable?
    Help to answar
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Apr 5, 2015, 11:50 AM
    http://www.google.com/url?sa=t&rct=j...lH8E09gMw2AZHw
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #3

    Apr 5, 2015, 01:58 PM
    Beyond what ma0641 provided to steer you in the right direction... its your homework assignment to complete. If you get stuck doing it then provide all the work you have done and someone could point out where you went wrong.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

If I loop a cable around a clamp on ammeter 3 times and get an amperage reading [ 6 Answers ]

If I loop a cable around a clamp on ammeter 3 times and get an amperage reading of 15, what is the actual amperage of the cable? If a cable is looped once around a clamp on ammeter and the amperage reading is 4, what is the actual amperage of the cable? Is there a formula?

How to find school that closed down in 1980 in chicago,il in the loop [ 1 Answers ]

How to find aschool that closed down in 1980 in Chicago,Il in the Loop trying to get transcript.

Smog test failed because of Fault code P0452 [ 1 Answers ]

I have a Chevy 1999 suburban that failed smog test fault codes or P0452 and the service engine light is on... I live in California and would like to know what should I do?

Test for ground fault breaker not working [ 1 Answers ]

Test button will not set off breaker for spa, wired from inside house 50amp double pole red black to hot, white to neutral, and ground to ground. Ran to out side gfci breaker box, screws in the box hot to hot black, and red, ground to ground and neutral to the neutral screws. Then from gfci...


View more questions Search