Ask Experts Questions for FREE Help !
Ask
    poneal's Avatar
    poneal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2015, 12:29 PM
    How to install harness 691996 on a 16hp v twin horizontal shaft
    I have 16hp v twin with harness number 691996. It is horizontal shaft. My ignition switch has 6 prongs. It does not have the carb solonoid and has a voltage regulater. Where do the wires connect?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 18, 2015, 12:17 PM
    Is this your harness? Amazon.com : Briggs & Stratton 691996 Wiring Harness Replacement for Models 493624 and 691996 : Lawn And Garden Tool Replacement Parts : Patio, Lawn & Garden
    Do you know the model of your Briggs engine?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cub cadet 2160 16hp vanguard v twin [ 1 Answers ]

I replaced both head gaskets,adjusted the valves to .004, changed the oil, plugs, and air cleaner. It started right up and I mowed for about 20 min and it started to smoke and blow oil. I discovered the dip stick tube seal blew. I since replaced the seal and readjusted the valves, checked the...

Replacing starter moter on 16HP V-Twin vanguard engine [ 11 Answers ]

I have a Briggs and Stratton 16HP V-Twin OHV Vanguard Engine I am repairing. I am trying to replace the starter motor. . The bendix of the starter motor is plastic and has broken teeth and therefore does not engage with the main flywheel anymore. In order to accomplish this task I have stripped...

Briggs 16hp V-twin no spark [ 7 Answers ]

I have a briggs Vanguard 16hp V-Twin with no spark. Had trouble with it a couple months back (no fuel and no Spark on one side). This engine is mounted in a van and used for turning carpet cleaning equipment Gets a lot of hours year round. I figured I'd do some work on it while I had it out, here...

What engine oil for a B&S Vanguard V-twin OHV 16hp [ 2 Answers ]

What engine oil for a B&S Vanguard V-twin OHV 16hp >Moved from Forum Help<

16HP B&S Vanguard V Twin won't start [ 4 Answers ]

Hi My 16HP B&S Vanguard V Twin won't start. There was a thing with wires at the bottom of the carb, but when removing the carb to check for a blockage, the wire snapped off. However, this does not seem to prevent the float chamber filling with fuel. There is fuel being pumbed from the fuel pump...

View more questions Search