Ask Experts Questions for FREE Help !
Ask
    Bathroombiddy's Avatar
    Bathroombiddy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2015, 09:13 AM
    Appropriate hose spray attachment for bath mixer tap
    Can you advise the correct type of hose/spray attachment for my bath mixer tap [see attached pics]. I specifically need something to be able to wash my hair. Thanks.
    Attached Images
      
    MegaRichT's Avatar
    MegaRichT Posts: 2, Reputation: 2
    New Member
    		  
    #2

    Feb 27, 2015, 10:03 AM
    Your actual tap hole is round. Try this - maybe contact them first.

    http://www.everydropisprecious.com/s...quick-fit.html

    https://www.youtube.com/watch?v=D3t6bEhJ5Qk

    Alternatively there are rubber ones. Trouble is you only have one tap so on Ebay there is a single tap shower attachment "Deluxe 1 Single One Tap Fitting Mixer Shower Bath Head & Hose Spray Hair Wash". If you have a combi you might find the water pressure is a bit high so you may have to find a way to fix it on...

    Richard
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Feb 27, 2015, 10:30 AM
    It looks like Richard has posted a decent website with stuff that may work real well for you, Bathroombiddy. Be aware, however, that the tub valve posted is not temperature and pressure balanced so you can get cold and/or hot SHOCK if someone uses a faucet or toilet when you are using the tub as a shower, OK?

    Post back with questions if you have any, OK? Thanks for posting Richard!

    Mark
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #4

    Feb 27, 2015, 11:33 AM
    I was going to suggest a Home Depot fix, but I like yours better Richard.



    http://www.homedepot.com/s/shower%25...faucets?NCNI-5
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bath tap leaking from where the mixer head is attached to the legs (pillars) [ 2 Answers ]

Can you please tell me what washer I need to stop the leak from the nut where the single lever mixer tap is connected to the pillar legs on my hot water side.

Bath/Shower Mixer Tap. [ 0 Answers ]

I have a bath/shower mixer tap which on the temperature tap has a red button which you have to push in to get to the higher temperatures. I turned a tap too much and this button popped out. I still have control over temperature (can actually turn tap further and get hotter water than before now)...

Bath mixer tap [ 2 Answers ]

Finally I have a problem for you guys. http://blog.victorianplumbing.co.uk/Images/8Ultra-Minimalist-Thermostatic-Bath-Shower-Mixer-Tap-Chrome.jpg Same function but different design to this one. Right for temp and left for flow, pull for shower. Even with the temp full HOT the water is...

4 hole bath/shower mixer tap [ 1 Answers ]

Hello Does the spout of a 4 hole tap system have to be in the middle or can the whole unit be centralised.

Bath Mixer tap [ 2 Answers ]

How do I repair a bath mixer tap when the water is running half into the bath & only half is going up to the shower head? The control for the water to go up the shower head is by pressing down a ring on the bath tap just at the bottom of the hose leading to the shower head.

View more questions Search