Ask Experts Questions for FREE Help !
Ask
    Jen Daly's Avatar
    Jen Daly Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2015, 03:16 PM
    Priming water pump
    When priming a jet pressure tank pump is the pump on or off while filling the top of the pump with water?
    paraclete's Avatar
    paraclete Posts: 2,706, Reputation: 173
    Ultra Member
    		  
    #2

    Feb 19, 2015, 03:48 PM
    Desirable it be off otherwise you may have a new fountain
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Feb 19, 2015, 06:13 PM
    Off off
    Jen Daly's Avatar
    Jen Daly Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Feb 20, 2015, 01:21 AM
    Thank you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My well water jet pump when priming it loses pressure at 15psi over and over again [ 1 Answers ]

My well water jet pump when priming it loses pressure at 15psi over and over again

Pump priming [ 1 Answers ]

Today I tried to have my house power washed and within less than half an hour my water pump was drained with no pressure reading on the gauge. AS I have done before, when pressure goes below about 20 lbs, I shut of pump. After it stands for a few hours it will usually begin to pump and fill my...

Priming a burks water pump [ 1 Answers ]

I would to know how I prime my water pump. It's a Burk brand pump.

Priming an above ground water pump [ 2 Answers ]

The water in my shallow well went below the pipe last summer and my pump needs priming. When I turn it on it has pressure in the tank but no water. How do I prime this above ground water pump?

View more questions Search