Ask Experts Questions for FREE Help !
Ask
    wildcat79's Avatar
    wildcat79 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 13, 2015, 05:18 PM
    1997 ford 7.3ps. Very hard cold starts when cold.
    Need good honest mechanic to fix 1997 ford 7.3ps. Very hard cold starts when cold
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Feb 13, 2015, 06:21 PM
    Diesel Fuel and Cold Weather

    Wax, naturally found in diesel fuel, begins to form crystals, as the temperature drops. The cloud point is the point at which crystals form. Eventually, crystals clog the fuel filter and starve the engine of fuel or prevent it from starting.

    Traditionally, one solution is to use #1 diesel fuel, which is diesel fuel diluted with kerosene. There are several disadvantages with using #1 diesel fuel, despite its advantage in low-temperature operations. First, the energy content is about 95% of #2 diesel fuel, resulting in less horsepower and reduced fuel economy. Second, the kerosene used in #1 diesel fuel provides less lubrication for the fuel distributor and fuel pump, increasing the likelihood for wear.

    There are products on the market, such as Amsoil Diesel Recovery, that dissolve the wax crystals that form when diesel fuel has surpassed its cloud point. It will liquify gelled diesel fuel and thaw frozen fuel filters. Since diesel fuel quality varies wildly from one filling station to another, low-quality fuel can have cloud points as high as 40 degrees F.

    Check these type of products out. They can reduce the cold filter-plugging point (CFPP) by up to 34 degrees F, in ultra-low-sulfur diesel fuel (ULSD), and up to 17 degrees F, in biodiesel. They also lower the fuel's pour point. Emergency diesel fuel treatments may help you avoid a costly towing charge.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1997 honda Accord 2.2 starts but dies because injector pulse stops [ 0 Answers ]

I'm working on a 1997 honda accord with a 2.2. I replaced the engine with another engine from a 97 also... *** note the other engine did not have a crank or cylinder location sensor behind timing components so I swapped everything from one to the other to all the sensors to be run on the engine I...

Washing machine repair portland, Oregon [ 4 Answers ]

My washing machine won't drain or spin? What is wrong with it? It just stops at the rince/spin cycle. Help!

We live in Portland Oregon. We need to replace our 30 year old Lenox oil furnace. We' [ 1 Answers ]

We live in Portland Oregon. We need to replace our 30 year old Lenox oil furnace. We're being bid an oil furnace heat pump combination. No access to gas. Should we keep a combination system or go strictly heat pump? Advantage of having both systems? Any suggestions?

Looking for Good Mech (Suspension) in RI [ 0 Answers ]

Recently moved back to RI. Most places I used to know went out of business or were not dependable. I am looking for a competent mechanic in RI for suspension work (shocks/struts). Cheers

Furnace blowing cold air.starts out warm, goes to cold. [ 6 Answers ]

Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....


View more questions Search