Ask Experts Questions for FREE Help !
Ask
    needy housewife's Avatar
    needy housewife Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 18, 2015, 12:10 PM
    Shower help
    We recently took our tub out and put in a shower only. We simply removed the tub nozzle, but the water now does not turn all the way off. The problem started when my husband strong armed the faucet to get the hot water to work. Now we have hot water but it will not turn all the way off. Any suggestions?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jan 18, 2015, 01:10 PM
    Hello needy housewife,

    More information is needed, tell us the brand and the model number of your faucet also if you can post a picture of your faucet will help great, Thanks.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change cartridge on single lever shower american standard shower systems [ 0 Answers ]

How do I remove the old cartridge on an American Standard single lever shower/tub system?

Do we tile all of the shower walls even around the shower pipes then shower handle on [ 4 Answers ]

We are tiling around the tub do we tile all 3 walls then put shower handle and tub spout on walls or do we put tub handle on wall then tile around it?

Proper shower pan install utilizing exsting basement shower drain [ 6 Answers ]

I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...

Build Shower Platform & Install Above Ground P-Trap in Basement Shower [ 1 Answers ]

Hello, I'm new to this site. I tried to find the answer in previous posts and did find some great info, but I still have some questions :) This is what I want to do: Install a corner shower with dimensions 36" in x 36" in the basement, build a platform, & add an above ground p-trap. ...

My shower drain is raised above the shower pan by 3/16" causing standing water [ 2 Answers ]

I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...

View more questions Search