Ask Experts Questions for FREE Help !
Ask
    chris ross's Avatar
    chris ross Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2015, 02:29 AM
    Unique ceiling light fixture missing parts
    I purchased a close out ceiling mount light fixture that is very fancy, has some damage but since getting it out of storage to install it appears to be missing the three bulb base. It is Mode 24040 -836CL SKU#412-138, if someone can help with any information I would be grateful.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 3, 2015, 06:50 AM
    None of those numbers mean anything if we don't know the manufacturer or what the fixture looks like. This is not a manufacturers web site.
    If it is missing a whole socket assembly then you maybe totally out of luck. Parts for inexpensive imported fixtures are nearly impossible to come by.

    Can you post a pic of the fixture?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #3

    Jan 4, 2015, 08:36 AM
    The first thing to do is contact the manufacturer. Just because it is "closed out" doesn't mean it isn't being manufactured anymore, just not carried in the store you went to.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I add a light fixture before a ceiling fan light with switch at end of run? [ 1 Answers ]

I have a ceiling fan light fixture with power entering (R,WB wiring) from left side and the switch that controls the fixture on the right side (R,W,B wires) I want to add a light fixture before the fan/light and have it controlled by the same light part of the switch at the end of the run. That...

How do I wire ceiling light fixture? [ 3 Answers ]

I'm trying to install a simple pendent light fixture to the dinning room ceiling and could use some help. The light fixture has three wires; 1 neutral, 1 live and 1 ground. However the wiring from the ceiling looks more complicated. There is a bundle of 3 black wires, a bundle of 3 white wires and...

Ceiling light fixture blew two light bulbs in 2 weeks? [ 1 Answers ]

I have 2 ceiling lights in one room that turn on with a single switch. One works fine every time. The other has blown 2 lightbulbs in 2 weeks (incandescent). There were CFL's in them earlier and I took them out to replace them with the incandescent type. The first one seemed to burn out after a...

I have connected the light ceiling fixture but the light remain on cannot switch off [ 7 Answers ]

I have two black wires, one red, one wihite out of the box. I have connected the two blacks with the black fixture, and white with the white fixture wires. The red is not connected. The light (florescent U-tube light) comes on, but stays on, regardless of the switch being in the on or off position,...

How to connect a ceiling light fixture [ 8 Answers ]

I just moved into a house where the seller took the kitchen light fixture. I am planning to install a new light fixture. I believe the outlet may be controlled by two different switches, and I'm not sure how to connect it. The box in the ceiling has 3 wire screws. One covers a black wire, one...

View more questions Search