Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
On 4 wire 240v breaker box
[ 3 Answers ]
There is only one grd block in the box. Do I connect the green and White at the same block? Rick
3 wire 240v to 4 wire 240v with 50amp gfci spa pack in between
[ 1 Answers ]
I need the easiest yet still safe and legal way to hook up my hot tub. I have a 200 amp main service in the house which feeds a detached garage, which has its own small panel out there. I am wanting to use an existing 50 amp breaker(previously used for a welder) which has a 3 wire heavy gauge black...
How do I wire a 240v lake water pump gfi breaker
[ 5 Answers ]
I have a 4 wire cable leading to a pump in my lake. It has been a long time since I wired it, but I think the neutral(white) and ground are connected to the same point at the pump. I currently have it wired to a standard 20amp 240volt breaker. I recently tried to wire it to a 20amp 240volt gfi...
Can hook up a 110v gfi breaker of one leg ogf a 220v 50 gfi
[ 3 Answers ]
I have a 50 amp 220 v gfi hooked up to my hot tub, I ran a 110 v 10 amp gfi off one leg for the underwater light just for extra safety, is this safe to do? I have heard on TV that you can not run 1 gfi off another. Or is this just pertaining ti wall outlets?
How to wiring gfi 50 amp breaker I have red black white copper wire
[ 1 Answers ]
How do you wire a 50 amp gfi double pull circuit breaker to a hot tub. From hot tub I have a hot black and red and white neutraul where do these wires go on the breaker. View more questions Search
|