Ask Experts Questions for FREE Help !
Ask
    Carol Freeman's Avatar
    Carol Freeman Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 29, 2014, 03:25 PM
    Electrical Help
    We are trying to find an adapter cord to plug into a home clothes dryer plug (3 prong 220 v) that will reduce the power down to 30 amp and regular 3 prong heavy duty extension cord. It is to safely enable us to convert an unused dryer outlet in the garage to 110 so we can use the 110 to run power to an RV in the driveway.. (visiting friends).

    Is it possible to buy something that will work or does the 220 v power source have to be adapted.. if so, how is that done.? Help, guests are arriving soon.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Dec 29, 2014, 04:22 PM
    There is not such device.
    If you have a receptacle for a 3-prong dryer plug that means you have two hot wires and a ground but no neutral at the receptacle box. If you had a receptacle for a 4-prong plug, that would mean you have two hots, an neutral and a ground at the receptacle box.
    If you had a receptacle for a 4-prong plug it could be removed and replaced with a 30 amp receptacle, using one hot and the neutral. A 120 volt line requires a neutral.

    Time to call electrician.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Dec 29, 2014, 06:05 PM
    No adapter as was explained. However, most dryers operate on a 2 pole 240 volt, 30 Amp circuit to begin with.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Dec 30, 2014, 02:42 PM
    If you have a receptacle for a 3-prong dryer plug that means you have two hot wires and a ground but no neutral at the receptacle box.
    This is not correct and never has been.
    An older three prong dryer circuit and receptacle has two hots and a neutral, but no ground. The neutral also serves as the ground, not the other way around.

    Quote Originally Posted by Carol Freeman View Post
    We are trying to find an adapter cord to plug into a home clothes dryer plug (3 prong 220 v) that will reduce the power down to 30 amp and regular 3 prong heavy duty extension cord. It is to safely enable us to convert an unused dryer outlet in the garage to 110 so we can use the 110 to run power to an RV in the driveway.. (visiting friends).

    Is it possible to buy something that will work or does the 220 v power source have to be adapted.. if so, how is that done.? Help, guests are arriving soon.
    As stated, you cannot use this three prong dryer receptacle for your RV. If it were four prong you could make up a makeshift adapter using one hot the neutral and ground to give you a 30A/120V TT30 travel trailer receptacle.
    As suggested, an electrician can decipher what you have to determine if it can be used.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the virginia electrical code number restricting a electrical box in a closet [ 3 Answers ]

Need to now the code in virginia by number On the placement of a circuit box in a clooset

Hy dose one electrical outlet make my ac adapter run hotter than another electrical o [ 2 Answers ]

Why dose one electrical outlet make my ac adapter run hotter than another electrical outlet? Two different AC adapters showed the same heating tendency. Multimetered both outlets the hot one runs at 122 v the other is at 120 v. I can't see that the voltage would cause the AC adapter to run...

Toro Lawn Tractor : Electrical power not getting to the electrical clutch. How fix? [ 2 Answers ]

1992 Toro Lawn Tractor with excellent mtnce: The electrical power is not getting to the electircal clutch. What is the problem and how do I fix it? Thanks

Can substandard electrical wiring installation at home produce electrical arching [ 6 Answers ]

Can substandard electrical wiring installation at home produce electrical arching? Then fire?


View more questions Search