Ask Experts Questions for FREE Help !
Ask
    joshuatree421's Avatar
    joshuatree421 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2014, 06:10 PM
    Heat pump blows 3 amp fuse
    Recently we had a bad storm in Florida after the storm I noticed the 3 amp fuse keeps blowing when turning the stat to heat.

    I have a carrier model FB4C any advice for a novice would be much appreciated.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Dec 27, 2014, 12:53 PM
    I would go to the heat pump and take a look at all the low voltage wiring. Sound's like you have a short out there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Turning on heat blows fuse in central ac unit [ 0 Answers ]

When I turn on the heat on central ac 5 amp fuses blow

3 amp fuse blows [ 2 Answers ]

Hello, I have a 20 year old electric furnace, both the outside and inside unit are called a comfort maker,and are made by a company called Inter city products. The air conditioner works perfect, both inside and outside units. As soon as the thermostat is turned to heat, it blows the 3 amp...

Bryant heat pump continually failing 3 amp fuse on insid control board.. [ 0 Answers ]

I have a Bryant heat pump model # 663CJX036000 ABAA. This Unit is both heating and cooling. The inside blower is a furnace. The 3 amp fuse is continually failing when the when the unit makes a call for heat or cool to the heat pump. I have, in the beginning of 2012, replaced the control board,...

Heat pump never turns on, handler blows continuous with no heat except with AUX heat [ 2 Answers ]

10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...

Heat Pump blows 5amp fuse when switching between defrost & back to heat. Them Heat work [ 3 Answers ]

I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...

View more questions Search