 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No water to ice maker
My sister is 81 I am 78. We have a plumbing problem. I am getting no water to the line for the ice maker, also a faucet on the front and one on the side of the house.I am also not getting water to some of the sprinklers. I don't know if It's a broken pipe or what it is. I have no money at all. I don't know what to do.
Thank you for any help you can give me. I live in CA in los angeles county. |
||||
|
||||
|
It's time to make some calls -- to your public library's reference desk, to your village and township offices, and to your county's senior services office. (The library will give you the latter three numbers, by the way.) I'm guessing there are volunteers and/or agencies willing to help you. Area churches are another place to check with.
|
||||
|
||||
|
This isn't an emergency, so if you don't want to annoy people when calling around, please don't say it is. Water lines to ice makers break, clog, or freeze constantly. Get out your old ice cube trays or buy one at a dollar store. You don't need sprinklers.
|
||||
|
||||
|
I agree with above post. Not getting water to sprinklers or icemaker is not considered an emergency. Repair of sprinklers my be costly. Icemaker should be just matter of common sense: make sure your valve is open ( the one where icemaker line attaches to water supply), and make sure your FILTER inside fridge is not in a need of replacement ( if dirty, it will stop water flow ). I am sure you can deal with icemaker yourself ( or ask your friend ) and sprinklers can wait until next season. It is raining in LA for the last two days, anyway.
Question: What part of LA are you in ? Milo |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Ice maker not making cubes my ge profile ice cube maker has stopped making ice
On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...
I put in a new water inlet valve but the water line from the valve to the ice maker keeps slipping out. I push it in hard and it seems tight but several days later it comes out. What is the procedure to keeping it in tight? Thanks
Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...
I have replaced the water valve and the module. Water dispensary works. The plastic lines are not plugged. The wire arm goes up and down. I poured water in the ice maker and in a few days there were ice in the pan. The model is #ksrf22dtal00. I crossed the connectors on the valve and the water...
View more questions Search
|
