Ask Experts Questions for FREE Help !
Ask
    483Dazza's Avatar
    483Dazza Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 30, 2014, 04:44 PM
    Monda ceramic tap
    Relatively new tap is dripping. I cant get the spindle undone to clean out the ceramic disks. ( if this is the problem? )
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 30, 2014, 05:45 PM
    Debris in between the discs is a problem, particularly on a well. The debris keeps the discs from overlapping and closing. Most of the units have a cap that unscrews and the spindle pulls out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loud humming noise when hot tap turned on on any tap and when flushing toilet [ 5 Answers ]

Loud humming noise when using the hot taps on any tap in the house also when using the flush on the toilet. Also when using the bathroom sink the kitchen starts smelling like sewage. Please help!

Can you replace plug type tap with a quarter turn ceramic [ 3 Answers ]

I am doing a shower renovation and have removed the old plug type tap and replaced it with a quarter turn cermaic tap. I am using the same screw connection that was set into the wall for the plug type tap. I have found that when they ceramic tap has been fitted water flows through the shower even...

I have only luke warm water coming through my hot bath tap and sink tap [ 0 Answers ]

Hello I am suddenly only getting luke warm water coming through the hot taps in my bathroom. All other rooms are fine. I have a bungalow with two bathrooms a kitchen and a utility room. The system is run off a LPG combi boiler.

Attaching ceramic corner shelf to ceramic tiles [ 3 Answers ]

I want to add a couple of ceramic shelves to my bathroom ceramic tub surround. What can you use to attach ceramic shelves to ceramic tiles? I tried the same glue used to put tiles on the drywall but they just slide. Thanks in advance!


View more questions Search