Ask Experts Questions for FREE Help !
Ask
    pdziekan's Avatar
    pdziekan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2014, 10:59 AM
    Heil furnace codes and corrective action
    I have a heil furnace 9mpd, model h9mpd075f12b1. I was/am getting some heat but not up to the temp setting on the thermostat. I have a code of 1 flash followed by 6 flashes. I put new batteries in the thermostat and opened the furnace to see the code. Soon after the furnace kicked on and seems to be operating properly. Do I have a furnace problem or was the battery replacement the fix? Thanks.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Nov 17, 2014, 11:39 AM
    I don't think it's stat. That flash code is soft lockout, flame failure. Try cleaning the flame sensor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? [ 0 Answers ]

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...

Intertherm furnace codes? This furnace flashes the yellow light 6 times [ 0 Answers ]

Furnace will run for 30 seconds. It shuts down and the yellow light will flash 6 times and the does the same thing over and over. Red light stays steady. Thanks for the help.

I have a heil 9000 furnace I turn the furnace on and nothing happens [ 0 Answers ]

I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be

What are the codes for the blinking light on a 2004 heil furnace? [ 0 Answers ]

2004 heil gas furnace. The heneywell gas valve blinks twice. If I turn the switch off( on the valve ) the blower comes on, then turn the switch back on and the unit operates. What are the codes for the blinking l.e.d.

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

View more questions Search