 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need a replacement for an Amtrol water heater. Suggestions?
I do not want to put it in another Amtrol product. Plumber is telling me pipes have to be changed re: bottom feed system of Amtrol vs. all others. How much should this cost? Have recommendations on SuperStor and Heat-Flo.. does anyone have experience/recommendation on either?
|
||||
Check out some similar questions!
I recently replaced my hot water heater, basically same capacity, etc. as the previous heater. I am noticing a drop in water pressure in the entire house, guess would be 20-25%. The only change is I used a dielectric union between the new heater and copper pipe. I have to assume the water heater...
I have the same problem with hot water pressure loss. 50 gal gas power vent ( american hwt ). The only thing different is the dielectric unions. The nipples on the tank do have a blue plastic lining on both sides. Also, I have 1/4 turn ball valves on both hot and cold sides of the tank, which is...
Just removed water heater to replace. Turned off water to water heater and turned water on to rest of house-cold water. Now have cold water why when the cold water valve is turned on water is coming out of pipe that would have the hot water leaving the hot water tank. Decent flow from this pipe...
Our water heater works for a few hours then goes out. I restart the pilot light, it works for a while, then goes out. Any thoughts?
I need my water heater replaced & the plumber that came out seams to be finding ways to increase the bill. I live in northern Ca & have a natural gas water heater. Are the following items necessary? 1. bonding & grounding 2. gas drip leg 3. expansion tank
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
