Craftsman rider 14.5 hp won't start

brapone Posts: 1, Reputation: 1

New Member

Oct 14, 2014, 10:07 AM

Craftsman rider 14.5 hp won't start

I shut my rider off and when I went to start it won't start sounds like a grinding noise tapped on starter and getting the same thing

Check out some similar questions!

Craftsman rider won't start [ 8 Answers ]

Late '80's vintage 18HP, 44" rider. Been running like a champ until recently. Started running very rough a couple of weeks ago. Had to choke all the way to keep in running. Decided to start with new spark plugs to rectify. Now I don't get any spark. Turns over just fine. Amp meter on dash...

Craftsman rider kohler 25 HP won't start [ 2 Answers ]

Sat for 2 years, now it won't pick up the fuel in the clear filter. Does anyone know if it has a fuel pump?

Craftsman rider mower won't start [ 2 Answers ]

My craftsman lt1000 won't turn over. It has new battery. New spark plug. The fuel lines are clean

Craftsman/Murry rider won't start [ 10 Answers ]

I just bought a craftsman model 502-255092 (10 hp tucumseh) mower and it was running fine, I changed the belts(put the wrong one on the drive... I've figured that out) It wouldn't shift well so I tilted it on its side(carb side up) I then tried to re start it and it turned over... but would not...

Craftsman 14.5 hp rider that won't start [ 1 Answers ]

I have a 14.5hp BS (Briggs) that won't start. I have a new battery, new starter, and new ignition switch at the key. The only things I haven't changed is the wiring harness (which is newer because a fire issue 5 years ago), and the switch that all the wires and battery cables run to which is...

View more questions Search

Check out some similar questions!

Add your answer here.