 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Janitrol furnce blowing 3A FUSE on circuit board
Was trying too fire up my tenants furnace , found the fuse blown - from previous season ? Installed new only to pop instantly , can't find any visible shorts . I disconnected Thermostat wires.. still pops fuse, what am I missing ?
|
||||
Check out some similar questions!
After connecting a wire in the bathroom lights all my breakers tripped in turn them all on , everything else in the house went back to work accept my upstairs ac. There's power going to it but I notice a 5 amps fuse on the air handler was blown. Replaced and it blown again.so I disconnect the...
After reading several posts, I checked the 2 wires going outside and found them to be fine. Replaced contacter, still blows fuse. Replaced 2 wires going outside just in case I missed something the first time, still blows fuse. Removed wires from contacter and does NOT blow fuse. What else am I...
Hello, I Am Having A Problem With My Carrier Weathermaker 8000 Air Conditioning. It Keeps Blowing The Fuse In The Circuit Board Inside The Furnace Unit. Yesterday I Checked The Wiring Inside The Thermostat Tightened A Couple Of Wires And The Unit Started ( Yea) But It Ran Continuously For...
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
Why would the fuse blow on the circuit board? I changed it last night at 6PM and 9:30AM it was out again could it be a capacitor?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
