Ask Experts Questions for FREE Help !
Ask
    Ss81's Avatar
    Ss81 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2014, 05:55 AM
    American Standard Dual Flush Cadet 3
    Hi guys,
    I've been having some issues with my dual flush toilet. The toilet keeps filling after every 20 min or so. I then turned off the water supply and left it overnight. In the morning the tank was completely drained. I'm guessing it's some kind of seal between the tank and bowl but I have no idea how to disassemble the components in the tank. Where is the seal located? Where is the flapper? Any thoughts would be appreciated. Thank you
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 12, 2014, 06:26 AM
    My guess is a bad bottom seal, there is no flapper. You have to remove the center part to get to the seal which is on the bottom. Push down slightly and twist to the left. It will disengage and when you pull it out you can see the seal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

American Standard or Rheem [ 1 Answers ]

I am trying to decide between a Rheem high efficiency furnace and an American Standard. Which furnace is better of the two and which one of the two is most economical ?

American Standard [ 16 Answers ]

How to remove shower valve american standard

Mancesa flush lever different than standard levers [ 8 Answers ]

I purchased a mancesa toilet 4 years ago my lever broke and I am having as hard time locating another lever. The little square piece that fits in to the poceloan tank are to small my old lever had 2 small traingle on the edge of the 4 edges of the lever insert. It is hard to exsplain but there is...

No cold water on american standard cadet 3 handle shower fixture? [ 2 Answers ]

Cold water valve to shower is on. Fixture is about 1 year old.

Replacing an old Incesa Standard toilet with American Standard [ 0 Answers ]

Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...

View more questions Search