Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Flex Connector for gas range is too big for the gas supply line
[ 3 Answers ]
Got a new gas range. The old range had a yellow gas flex connector and fit perfectly on the brass flare end of the supply pipe, but the new steel connector is too big for the flare end fitting of the gas supply pipe, although just right for connecting to the range. The house was built in 1957, and...
The gas line broke on a Ryobi 725r and I need to know the diameter of the line.
[ 1 Answers ]
The gas line broke on a Ryobi 725r and I need to know the diameter of the line.
Stove gas leak, or sewr gas leak?
[ 2 Answers ]
Hello, we have a problem in that we have noticed a smell much like gas inside our house. Our toilet is not properly attached to the floor, it just sits there and is unstable. Do you think it is there that the smell is coming from. Or do u think it is the stove that has a leak? Thank you.
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
Connection to gas range gas line too large for gas line intake valve
[ 2 Answers ]
Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy? View more questions Search
|